Very touching, mom! Focus 3D Shield curved glass protects your iPhone 15 from all sides.

Focus delivers the full power of the iPhone 15 Pro Max with Focus 3D Shield Curved full-screen glass that protects the entire curved screen to the edge of the device. Significantly reduces the occurrence of cracks at the edges of the film. From high quality materials. Sticks strong and smooth. There is no problem if the film is pushed. 9H scratch resistance protects the screen better. Answering the needs of every lifestyle.

Focus 3D Shield Curved is a completely transparent glass panel that is curved in 3D when installed on the iPhone 15 Pro Max screen, so that it curves smoothly with the corners of the mobile phone screen when viewed with the normal eye without going into details. It is almost impossible to tell whether the glass has a film attached to it or not.

Focus 3D Shield Curved is only 0.33mm thick and has beautiful curved edges. Closely attached to the device Can be used with many standard shockproof cases without pushing the film.

Problems Often encountered The problem with installing the glass film for iPhone is that the side edges crack easily. Since it is more likely to fall, Fox uses polymer materials that have properties that prevent cracking or chipping. It increases the strength of the glass edge well.

In terms of screen protection, the Focus 3D Shield curved protective glass meets the 9H scratch protection standard for excellent scratch resistance. From the test, bring something hard like a key or a knife. The protective glass on the back next to the iPhone 15 Pro Max screen was scratched, and no scratches or dips were found. Does not hurt the mobile phone screen. It can still be used normally

The Focus 3D Shield curved protective glass is coated with an oleophobic and water-repellent layer, which helps make the touchscreen smooth, non-sticky and clear. The screen can be displayed beautifully and clearly. Does not degrade iPhone 15 Pro Max screen performance, even with film attached.

Focus 3D Shield curved protective glass is easy to install, repels glue well, and does not create air bubbles. Easy to clean and leaves no glue residue when removed. Comes with a full set of installation hardware. Provide convenience even if customers purchase and install it themselves through the following steps:

  1. Clean the screen to keep it free of grease and dust. With a microfiber cloth in the box
  2. Use screen stickers to keep dust away from the screen.
  3. Remove the plastic cover from the glass film, and installation should not be in an area with strong winds. Or there is dust that may enter during installation
  4. Orient the glass membrane to match the position of the top speaker and/or bottom home button. Once it is straight, release it on the screen.
  5. Press the glass film in the center of the screen. The glass film will then expel the air from the screen itself.
  6. Use your hands to press the edges. So that the glass film sticks closely to the screen then wipe again.

Issue price

Focus 3D Shield curved protective glass supports the iPhone 13 series, iPhone 14 series, iPhone 15, iPhone 15 Plus, iPhone 15 Pro and iPhone 15 Pro Max, and is available for 690 baht and can be purchased on the website. Or at Focus stores and distributors nationwide

Leave a Reply

Your email address will not be published. Required fields are marked *